|
NEW G2 VERSION FOR 2016
NOW WORKS WITH LARGE CAMS
AND ON BOWS UP TO 6º PAST PARALLEL
Logo stamped on the bracket indicates it is suitable for past
parallel*
Split Limb L
Brackets G2
This compact, light weight bracket provides a quick and easy
attachment point for the Bowmaster Bow Press. The L design
presses from the limb tips and compress the limbs in much the
same way as when the bow is drawn. This new design works on a
wide variety of bows, including those up to 6º past parallel. They
work equally well on both solid and split limb bows and also
work on bows with flared limb tips.
The NEW Bowmaster G2 Split Limb
L Brackets are longer than previous versions and are designed to
fit large cams like those on the newer universal fit compound
bows. Like the 2015 version of the Split Limb L Brackets the new
G2 L Brackets will also work on bows up to 6 degrees past
parallel.
 
The Split Limb L Brackets are
available in 2 widths. The standard
width L Brackets will fit a maximum cam width of 3/4”, which
will cover about 95% of the bows on the market. The wide width
will fit a maximum cam width of 1 1/8” which are intended for
bows with wide cams like some models from Alpine®,
Bowtech®
and Diamond®.
Split Limb L Brackets G2
|
Size
|
Max cam width |
Item #
|
UPC |
| Standard |
3/4"
|
BMLB-G2-S |
6-08261-56001-3 |
|
Wide |
1 1/8" |
BMLB-G2-W |
6-08261-56005-1 |
* The Bowmaster
logo stamped on the brackets indicates that they are suitable
for use on bows up to 6º past parallel. Do not use on bows in
excess of 6º past parallel. Older Split Limb L Brackets without
the Bowmaster logo should not used on past parallel limb bows.
NOTE: Previous
version of the Split Limb L Brackets will not fit bows with
extremely large cams like those on the Bear Apprentice, Bear
Cruzer, Diamond Infinite Edge, Hoyt Ignite, Mission Riot,
Mission Craze, Quest Radical and other bows like them. These are
all universal fit compound bows with wide adjustment ranges for
both draw length and draw weight.
Is my bow past-parallel?
Click here
|
